About the The Daniels 24x50
The exterior is the visual signature. Sage-green vertical board-and-batten siding wraps the home with crisp white square columns supporting a full-width covered front porch. Peaked gable roofline with a sage-green-painted ceiling under the porch awning. White-framed casement windows in multiple bays along the side wall, plus a row of windows flanking the front entry. The porch flooring is composite plank in a warm wood tone, with black powder-coated metal railings tracing the perimeter. Raised on concrete piers with skirting installed after placement.
Inside, the layout dedicates real square footage to a primary suite at one end of the home (with private en-suite bath and walk-in closet) and a secondary bedroom at the opposite end (sharing the hall bath). The open kitchen-living-dining zone runs through the middle of the home with a vaulted ceiling, wide-plank LVP flooring, and large casement windows along the front-porch wall providing exceptional natural light.
Standard build: R-30 walls, R-49 ceiling, heat-pump HVAC, vinyl casement windows, freeze-resistant plumbing, premium-tier appliance package.
Spec: 1,156 sq ft, 2BR/2BA, HUD-certified single-wide, 14′ transport width, foundation install. From $80,899 factory-direct with free delivery within 1,000 miles of Smithville, TX. Featured on our Indiana state page. The Daniels is the right pick when you want true 2-bedroom 2-bath layout (with separate primary suite, not just two equal-sized rooms) plus the architectural board-and-batten exterior that signals “real house” from the curb.
STANDARD INCLUSIONS & FINISHES:
• Heat-pump HVAC, R-30 roof + R-21 walls, low-E windows, ENERGY STAR appliances.
• Certified electrical, plumbing, HVAC. Meets or exceeds HUD code and local requirements.
Standard Architectural Inclusions
Full appliance suite, solid shaker cabinetry, continuous counters, and open dining sightlines.
Private primary suite with generous closet storage, full vanity, and moisture-sealed fixtures.
High-efficiency heat pump HVAC, Low-E dual-pane vinyl windows, and Energy Star insulation pack.
Cambered steel I-beam frame, heavy-gauge flooring deck, and engineered roof trusses.
The Daniels 24x50
$80,899
or from $472/moIncludes standard regional delivery & installation
Your First Home Financing
Advertising the best mobile home financing rates available. Depending on your deposit to Lara Mobile Homes, unlock prime lending rates.
Get FinancingKey Features
Factory-Direct Consultation
Speak directly with our modular housing team regarding site prep, zoning permits, delivery timeline, or turn-key installation.
Room Dimensions & Layout Schedule
| Room / Area | Dimensions (L × W) | Area (Sq Ft) | Features & Inclusions |
|---|---|---|---|
| Living Room | Spacious Open Plan | 254.3 sq ft | Open great room with picture windows and natural light |
| Kitchen & Dining | Full Suite | 196.5 sq ft | Designer kitchen with full appliance suite, prep counters & dining area |
| Primary Bedroom | Master Retreat | 208.1 sq ft | King-size master suite with generous wardrobe storage |
| Ensuite Bathroom | Full Bath | 65.0 sq ft | Private full bath with walk-in shower and vanity storage |
| Bedroom 2 | Guest Room | 150.3 sq ft | Comfortable secondary bedroom with reach-in closet |
| Guest Bathroom | Full Bath | 45.0 sq ft | Second full bathroom with fiberglass tub/shower combo |
| Utility / Laundry | Utility Space | 25.0 sq ft | Pre-plumbed washer/dryer hookups and water heater |
| Hallways & Storage | Circulation | 407.1 sq ft | Central halls, linen closets, and storage |
Financing & Deposit Calculator
Customize your down payment, loan term, and interest rate for the The Daniels 24x50.
Your First Home Financing
Looking for the best rates? Buyers with a deposit for Lara Mobile Homes qualify for prime rates. Depending on the down payment you make, unlock preferred financing.
Get FinancingRedirects to Your First Home Financing • Requires deposit
Exterior Elevations & Customization Options
Every home is custom manufactured to order. If you prefer a clean, contemporary appearance rather than a rustic cabin or traditional look, we offer multiple exterior and interior finish packages:
Clean Architectural Look
Smooth horizontal lap siding in slate grey, arctic white, or charcoal; low-profile black window frames; modern full-lite front door with frosted vertical glass inserts; optional black standing-seam metal accents.
Suburban Neighborhood Style
Horizontal vinyl siding with decorative board-and-batten gables; white window surrounds; classic louvered shutters; 6-panel fiberglass front door with transom window.
Timber & Cabin Styling
Woodgrain textured siding in cedar tones; rough-sawn cedar porch posts with black metal bracket accents; dark earth-tone architectural shingles.
Interior Finish Packages & Floor Plan Customization
- • Builder Basic: Smooth drywall ready for custom painting, durable vinyl flooring, flat-panel shaker cabinets, roll-edge laminate counters. Perfect for homeowners seeking lower cost or planning DIY cosmetic upgrades.
- • Signature Luxury: Solid quartz/granite countertops, undermount farmhouse apron sink, soft-close dovetailed cabinets, Luxury Vinyl Plank (LVP) throughout, ceramic subway tile backsplashes, and tiled walk-in master shower.
- • Custom Floor Plans: Interior non-load-bearing walls can be adjusted prior to fabrication (e.g. combining bedrooms into larger suites, shifting exterior doors, or adding sliding glass patio doors).
Engineering & Climate Specifications
| Home type | Double Wide (2-section) manufactured home |
|---|---|
| Model year | 2026 |
| Nominal transport dimensions | 24 ft × 50 ft (measured over the eaves, including the hitch) |
| Box & Finished Width | 23\' 0" box width | 24\' 0" over eaves |
| Transported as | 2 sections of approximately 12 ft × 50 ft |
| Floor area | 1,156 sq ft nominal (1086 sq ft finished interior) |
| Bedrooms / bathrooms | 2 bedrooms, 2 bathrooms |
| Roof Snow Load Options | Standard 20 PSF | Engineered 30 PSF (Middle Snow) & 40 PSF (Heavy Snow for Utah, Montana, Wyoming, Colorado) |
| Thermal / Insulation Zone | Zone 1/2 Standard | Thermal Zone 3 Northern Package (2x6 Walls, R-21 wall, R-38 ceiling, R-22 floor, Argon Low-E windows) |
| Construction standard | Federal HUD Code — Manufactured Home Construction and Safety Standards, 24 CFR Part 3280 |
| Foundation Compatibility | Both Pier-and-Anchor & Permanent Foundations (Crawlspace Stem Wall / Basement for FHA/VA 30-Year Real Property Financing) |
| Certification documents | 2 exterior HUD certification labels (one per section), plus the interior data plate listing wind zone, roof load zone and thermal zone |
Transport & Siting Notes for This Plan
This home travels as 2 sections of approximately 12 feet wide each. The standard legal load width on US highways is 8 feet 6 inches, so each move requires an oversize permit from every state on the route. Two sections means two permitted moves and two sets of escort arrangements.
At 50 feet long, turning radius matters at every corner between the highway and your pad, and the pad itself needs to be level and compacted across the full 24-foot width with working room at the perimeter. Read more about route surveys, permits and site access for delivery.
As a multi-section home, the halves are joined on site along the mating line. That wall is structural, so the pier layout beneath it follows the manufacturer's installation drawings, and the heating and cooling duct, water, drain and electrical crossovers between the halves are completed during set-up. Those crossovers should be supported, insulated and sealed before the skirting closes in.
Footings must bear on undisturbed soil at or below the local frost depth, and the finished grade should fall away from the home so surface water does not collect beneath it. See what site preparation and installation involve, or check the FAQ on zoning, permits and financing before committing to a plan.
Interested in the The Daniels 24x50?
Request an itemized delivered-and-installed quote for your exact property, custom floor plan modifications, or foundation engineering guidance.